http://www.thaimeter.com/HANYOUNGnux/nx.html
HANYOUNGnux Multi input/Output temperature controller NX series Fuzzy/P.I.D auto tuning Heating/Cooling control Communication (RS485/422) Ramp and Heater Break Alarm(HBA)
|  |
|
* NX series |
| - Fuzzy/P.I.D auto tuning
- Heating/Cooling control
- Communication (RS485/422)
- Ramp and Heater Break Alarm(HBA) |
| |
|
|
|
 |
|
|
|
|
Model | NX9 | NX7 | NX2 | NX3 | NX4 | NX1 |
Appearance |
|
|
|
|
|
|
W × H × D (mm) | 96 × 96 × 100 | 72 × 72 × 100 | 48 × 96 × 100 | 96 × 48 × 100 | 48 × 48 × 100 | 48 × 24 × 100 |
Function |
?Fuzzy | ?Auto tuning | ?External contact
---input | ?Heater Break Alarm
---(HBA1) | ?Input filtere : OFF,
---1 ~ 120 sec. |
?Zone PID | ?2 Alarm outputs | ?Output limitation | ?Interface
---(RS 485/422) | ?REtransmission
---output (PV, SV, MV) |
?Group PID | ?Universal-input/
---output | ?Heating/Cooling
---control | ?Protection : IP 65
---(Front) | ?Heating/Cooling
---hysteresis |
|
Input |
Thermocouple : K, J, E, T, R, S, B, L, N, U, WRe 5 - 26, PL - â…¡ |
R.T.D : Pt 100 ?, KPt 100 ? |
Direct voltage : 1 - 5 V, 0 - 10 V, -10 - 20 mV, 0 - 100 mV (Free scale type) |
|
Sampling cycle | 250 ms |
Input display resolution | Below decimal point of Input signal and Measuring range |
Input impedance | T.C and mV input : Min, 1 ? d.c V : 1 ? |
Source tolerable resistance | Thermocouple : Max. 250 ?, Voltage : Max. 2 ? |
Lead wire tolerable resistance | R.T.D : Max. 150 ? / wire (notice : Identical conductor resistance between 3 wires) |
Input tolerable voltage | ± 10 V (T.C, R.T.D, Voltage : mV d.c), ± 20 V(Voltage : V d.c) |
Noise removal rate | NMRR (Nomal mode) : 40dB min. / CMRR (Common mode) : 120dB min.(50/60 Hz ±1 %) |
Standard | T.C, R.T.D : KS, IEC, DIN |
Standard junction temp. compensation tolerance | ± 1.5 ?C(15 ~ 35 ?C), ± 2.0 ?C(0 ~ 50 ?C) |
Burn-out | T.C : OFF, Up/Down selectable R.T.D : OFF, UP selectable (Detection current : 50 nA) |
Accuracy | ±0.5% (Full scale) |
Power supply for sensor |
12 V d.c ( Internal resistance : 600 ?) Max. 50 mA |
15 V d.c (Internal resistance : 600 ?) |
|
Model | Code | Information |
NX | - |  |  | Multi input/Output temperature controller |
Dimension | 2 | | | 48(W) × 96(H) mm |
3 | | | 96(W) × 48(H) mm |
7 | | | 72(W) × 72(H) mm |
9 | | | 96(W) × 96(H) mm |
Control type | 0 | | Universal type (heating control) |
1 | | Heating/Cooling control (synchronously) |
NX9 Option | 0 | NONE |
1 | RS485, HBA |
NX7 Option | 0 | NONE |
1 | RS485, HBA |
2 | SV2, SV3, HBA |
NX2,3 Option | 0 | SV2, SV3 |
1 | HBA |
2 | RS485 |
|
Model | Code | Information |
NX1- |  |  | Multi input/Output temperature controller. 48(W) × 24(H) mm |
Control type | 0 | | Universal type |
1 | | Heation/Cooling control (synchronously) |
Regular type option | | Type options | Heating output |
0 | RET | Relay |
1 | none | S.S.R/S.C.R |
2 | RS485/RET | Relay |
3 | RS485 | S.S.R/S.C.R |
4 | ALM | S.S.R/S.C.R |
5 | ALM/RS485 | S.S.R/S.C.R |
Heating / cooling type option | 0 | none | Relay |
1 | none | S.S.R/S.C.R |
2 | RS485 | Relay |
Cautious) | Product NX1-1 is able to select the control output among 6, 9, 10 and 11 outputs |
|
Model | Code | Informationo |
NX4- |  |  | Multi input / output temperature controller,
48(W) × 48(H) mm |
Control type | 0 | | Universal type(heating Control) |
1 | | Heating / cooling control (synchronous control) |
1 | | Heating / cooling control (only for NX4-20) |
NX4 Option | 0 | NONE |
1 | HBA, AL2 |
2 | SV2, SV3 |
3 | RET, RS485 |
4 | RS485, SSR / SCR |
5 | AL1, AL2 |
6 | AL1, AL2, SV2 |
7 | RS485, HBA |
Cautious) | Option 1: OUT1 (terminal 1-2-3) is applied as AL1 But, only with control output SSR/SCR selection |
| Option 3: OUT2 (terminal 11-12) is applied as RET |
| Option 4: OUT2 (terminal 11-12) is applied as SSR / SCR |
| Option 5: OUT1 (terminal 6-7) is impossible to apply as SV2 |
| Option 6: OUT1 (terminal 6-7) is applied as SV2 but only with relay control output. |
|
|
|
|
|
|
|
--
Asian Smarts Business Inc.